Formats And Limitations Of Outputs; Video Formats And Output Signals - Sony PMW-F55 Operating Instructions Manual

Formats and Limitations of Outputs

Video Formats and Output Signals

Tip
When using the 1.3× or 2× anamorphic lens, set "Aspect" in "VF Setting" (page 80) of the VF menu to "Anamo ×1.3"
or "Anamo ×2" to output the normal image without distortion from the SDI OUT (Sub), HDMI OUT, and TEST OUT
connectors.
Output formats for the SDI OUT connector
Serial digital signals from the SDI OUT connector are output depending on the settings of the setup menu
and format of the clip being played.
When outputting one type of SDI output by using the SDI OUT 1 to 4 connectors while "Main Operation"
in "Base Setting" is set to "YPbPr" (PMW-F55 and PMW-F5 + CBKZ-55FX only)
The "Frequency" setting
in "System Setting" of
the System menu
59.94/50
29.97/25/23.98
24
104 Formats and Limitations of Outputs
The "Format" setting
in "Rec format" of the
System menu
XAVC 4096 × 2160P
XAVC 3840 × 2160P
XAVC 4096 × 2160P
XAVC 3840 × 2160P
XAVC 4096 × 2160P
Output format
SDI (Main)
4096 × 2160 YPbPr Square Division
59.94P/50P 3.0G
4096 × 2160 YPbPr 2-Sample Interleave Division
59.94P/50P 3.0G
3840 × 2160 YPbPr Square Division
59.94P/50P 3.0G
3840 × 2160 YPbPr 2-Sample Interleave Division
59.94P/50P 3.0G
3840 × 2160 YPbPr Square Division
59.94P/50P 3.0G
3840 × 2160 YPbPr 2-Sample Interleave Division
59.94P/50P 3.0G
4096 × 2160 YPbPr Square Division
29.97P/25P/23.98P 1.5G
4096 × 2160 YPbPr 2-Sample Interleave Division
29.97P/25P/23.98P 3.0G (SDI 1/2 only)
3840 × 2160 YPbPr Square Division
29.97P/25P/23.98P 1.5G
3840 × 2160 YPbPr 2-Sample Interleave Division
29.97P/25P/23.98P 3.0G (SDI 1/2 only)
3840 × 2160 YPbPr Square Division
29.97P/25P/23.98P 1.5G
3840 × 2160 YPbPr 2-Sample Interleave Division
29.97P/25P/23.98P 3.0G (SDI 1/2 only)
4096 × 2160 YPbPr Square Division 24P 1.5G
4096 × 2160 YPbPr 2-Sample Interleave Division 24P 3.0G
(SDI 1/2 only)
3840 × 2160 YPbPr Square Division 24P 1.5G
3840 × 2160 YPbPr 2-Sample Interleave Division 24P 3.0G
(SDI 1/2 only)