Table of Contents
Advertisement
Technical data – V*AP
• Power supply
• AES input
• AES output
• Sync internal
• Sync input
• Sync output
• Network
• USB
• GPI
• GPO
• Environmental
• Dimensions
and Weight
Technical data – interface boards – 2 MIC/LINE Input [vap-mic-a]
• Max. input level
• Frequency response
• Input impedance
• Dynamic range
dual power supply, auto fail over
AC 85 V – 264 V, 50 Hz ... 60 Hz
58W max
AES3
110 Ohm balanced
0.3 V ... 5.0 Vpp
sample rate converter:
24 Bit, 32 kHz ... 192 kHz, THD+N: < -130 dB @ 0 dBFS
AES3
110 Ohm balanced
4.0 Vpp balanced
power fail relay bypass
44.1 / 48 / 88.2 / 96 kHz, +/- 25 ppm, 150ppm capture
AES3id: 48 kHz, 0,32 ... 1,2 Vpp @ 75 Ohm
Wordclock: 48 kHz, 1 ... 3 V @ 75 Ohm
Video: Black Burst or Tri Level, 0.5 ... 1.0V @ 75 Ohm
Wordclock 48 kHz: > 2 V @ 75 Ohm
RJ45 rear connector
10/100MBit Ethernet auto sense, full duplex, auto MDI/X
USB 2.0 connector to internal console interface
3 V – 30 V balanced, auto polarity
relay change over contacts, 200mA/24V (DC/AC)
operating temperature 0 ºC to 50 ºC
V*AP - fan cooled
non operating -20 ºC to 70 ºC
humidity 90%, non condensing
19", 1RU, depth 27 cm
net weight approx. 5 kg shipping weight 7,5 kg
14dBu (Mic)
24dBu (Line)
20Hz (-0.1dB) ... 22kHz (-0.1dB) @ SR=48kHz
20Hz (-0.1dB) ... 43kHz (-0.1dB) @ SR=96kHz
5.5kOhm, differential (Mic)
8.5kOhm, differential (Line)
> 109dB RMS, unweighted (20Hz ... 22kHz)
52
V*AP
Advertisement
Table of Contents
