Technical Specifications; Digital Signal Processing; Digital Inputs And Outputs; Analog Inputs And Outputs - junger Accent1 Operation Manual

T ECHNICAL SPECIFICATIONS

DIGITAL SIGNAL PROCESSING

sampling rate
audio data format
dither
channel status bits
sample rate converter
processing delay

DIGITAL INPUTS AND OUTPUTS

AES/EBU
connector
input format
output format
SYNC
WCLK in
WCLK out

ANALOG INPUTS AND OUTPUTS

INPUT
A/D-converter
dynamic range
input level
THD
CMRR
impedance
OUTPUT
D/A-converter
dynamic range
output level
THD
impedance
44.1 kHz ... 96 kHz
24-bit (AES/EBU)
TPDF type, 16bit, 20bit
transparent or conversion to consumer
or professional
asynchronous 44.1 kHz ... 96 kHz,
24bit, THD+N: -110dB
2ms (44.1/48kHz), 1ms (88.2/96kHz)
XLR, 5Vpp / 110 Ohm, balanced
BNC, 0.5Vpp / 75 Ohm unbalanced
AES professional, AES consumer
same as input
BNC, 1kOhm, unbal., TTL-level
BNC, unbal., HCMOS
24bit, oversampling, 44.1...96kHz
116dB (RMS), 118dB(A)
+12...+24dBu @ 0dBFS
-100dB @ -1dBFS
>110dB @ 50Hz, >90dB @ 20kHz
10kOhm, floating balanced
24bit, oversampling, 44.1...96kHz
117dB (RMS), 120dB(A)
+12...+28dBu @ 0dBFS
0.0012% @ +15dBu
30Ohm, floating balanced
Operation manual accent2, chapter 8 -technical specifications- page 8-1

8. TECHNICAL SPECIFICATIONS

8
8.1
8.2
8.3