Technical Specifications - junger d07 Operation Manual

TECHNICAL
SPECIFICATIONS
sample rate
audio data format
DIGITAL IN/OUT
AES/EBU
connector
input format
output format
channel status bits:
digital input -> digital output transparent
analog input -> digital output
ANALOG IN/OUT
ANALOG IN
Resolution
sample rate
dynamic range
THD+N
frequency response
CMRR
max. input level
input impedance
connector
ANALOG OUT
Resolution
sample rate
dynamic range
THD+N
frequency response
max. output level
output impedance
connector
44.1/48 kHz
24 bit
XLR, 110 balanced
AES professional, AES consumer
same as input format
fixed channel status bits
(professional/48kHz sample
frequency/2ch mode/24 bit audio)
24bit
44.1...48kHz
110dB (RMS)
114dB (A-weighted)
<0.002% @ max. input level
20Hz...20kHz (FS=48kHz) (+/-0.5dB)
–100dB @ 50Hz
+22dBu @ 0dBFS
10 kOhm, floating balanced
XLR, 1-screen, 2-live, 3-return
24bit
44.1...48kHz
108dB (RMS)
110dB (A-weighted)
<0.002% @ max. input level
20Hz...20kHz (FS=48kHz) (+/-0.5dB)
+22dBu @ 0dBFS
30 Ohm, floating balanced
XLR, 1-screen, 2-live, 3-return
6
A
digital signal
processing
digital
in- / outputs
analog
in- / outputs
A6 -Technical specifications