Utilities; Checking The Software And Hardware Revision Numbers; Monitoring Netaudio Server Status - Townshend Computer Tools DAT-Link User Manual

Chapter 10

Utilities

10.1 Checking the Software and Hardware Revi-
sion Numbers
In the event that you have diculty with the
should rst check the revision of the software and hardware that you have. This
can be done by typing:
naversion
As with all NetAudio programs, the server must be running before using this pro-
gram as described in Section 3.1. To check the version of the
to a remote host, use:
naversion -u host:unit
where host is the remote host name, and unit , which is usually 0, speci es which
DAT-Link
to query. Have a record of the information displayed available when you
call for support.

10.2 Monitoring NetAudio Server Status

The client program can be used to display the various parameters of
nastatus
the NetAudio server as well as the current state of recording or playback. Other
NetAudio programs can be run while
server parameters are re ected immediately in the
DAT-Link
or require support, you
DAT-Link
is active. Changes made to the
nastatus
display while values
nastatus
connected