Other Unix-Based Computers - Townshend Computer Tools DAT-Link User Manual

2.4 Machine Speci c Instructions
Con guring the Device Drivers
Next, you need to create a device in the
used SCSI ID 4 for the
datlink0
device to :
ln -s /dev/nrst0 /dev/datlink0
chmod 666 /dev/datlink0
Note that you will need to be logged in as
You can now proceed with the software installation in Section 2.6 below.
2.4.11 Other
UNIX
DAT-Link
The will work with most
If you have a computer not listed here, please contact your
information on support and installation instructions.
/dev
directory called
DAT-Link
, you just need to link the standard tape drive
to execute the above commands.
root
-Based Computers
-based computers that have a SCSI bus.
UNIX
33
datlink0
. If you
DAT-Link
supplier for