Townshend Computer Tools DAT-Link User Manual page 81

8.2 Using the Remote Control
Table 8.1: Recommended Remote Control Function Names
Command
Stop
Play
Pause
Record
Rewind
FF
Skip Fwd
Skip Rev
0 9
: : :
Open
Close
Power
local area network. See Section 3.1 for details on starting and using the NetAudio
server.
To use the command you need to specify two things: the name of the device to be
rc
controlled (the same name used with
Both of these can be given on the command line as in:
rc -r DTC75-ES play
The name after the option gives the device name. The remaining words on the
-r
command line are the commands to be executed.
Multiple commands may be given in which case they will be executed sequentially:
rc -r DTC75-ES stop rewind play
If the same device is used repeatedly, its name may be omitted from the command
line by setting the environment variable,
then the commands:
setenv DL_RC DTC75-ES
rc stop rewind play
perform the same function as the previous example. The
set in your login script . Note that this variable
1
options to and
naplay narecord
.login for users or .pro le for
1
csh
Function
Stop the DAT machine
Enter play mode
Pause or release pause
Enter record mode
Rewind tape
Fast-forward tape
Skip forward to next track
Skip backward to previous track
Numeric entry
Open tape drawer
Close tape drawer
Turn DAT power on or o
) and the function(s) to be executed.
rctrain
. If you are using the c-shell (
DL RC
must
be set to use the automatic
since they do not provide an option to set the
and users
sh ksh
77
),
csh
variable may be
DL RC