Townshend Computer Tools DAT-Link User Manual page 184

180
protoMinorVersion
Minor version of server's NetAudio protocol.
hardware Name of server hardware. This implementation will always return "DAT-Link"
h wVersion Server hardware version number.
hardware and firmware revision numbers.
s ource Input source for recording.
DL_ISRC_AES, or DL_ISRC_FIBER. The DL_ISRC_ALL settings instructs the DAT-Link
t o select whichever input has valid digital audio data present.
rxstatus Status registers of AES receiver chip. (Read-only).
l oopback Non-zero to enable ramp output during recording. Used for loopback testing.
dspProgram
This holds the name of the currently running DSP program. This may be changed automat-
ically by the server to satisfy requests for playback and recording. User DSP programs may
a lso be loaded by naloaddsp(1).
dspSIOMode
Current mode of the DSP32C's serial port. See naset(1) for a description of the serial port
modes.
Routines
int NAGetInfo(port,info)
NAport ∗port;
Ainfo ∗info;
N
Retrieve the current settings from the server.
int NAGetDefaultInfo(info)
Ainfo ∗info;
N
Fill in an NAinfo structure with standard default values. This can be used in combination with
NASetInfo() to place the server in a default state.
i nt NASetInfo(port,info)
NAport ∗port;
onst NAinfo ∗info;
c
Set the writable fields of the the server's status to the given settings. Attempts to change cer-
tain fields while data transfers are active will result in an ACCESS error. If another client has
s elected NA_CONFIGUREREQUEST events, then the NASetInfo() return will generate an
event for that client without changing the server's state. It will then be up to the client receiv
i ng the event to effect the changes as it deems necessary.
NA_CONFIGURENOTIFY event selected will receive notification if the server's state i
m odified. See na_event(3) for details on event handling.
SEE ALSO
netaudio(3), na_event(3), na_remote(3), netaudiod(8)
DAT-Link User's Manual.
N etAudio Reference
This implementation will return the DAT-Link's
This should be set to DL_ISRC_ALL, DL_ISRC_RCA,
Last change: 1993/11/11
NA INFO(3)
.
-
Also, any clients which have the
s
3