Nadspod - Townshend Computer Tools DAT-Link User Manual

NADSPOD(1)

NAME
nadspod – dump DAT-Link's DSP32C memory.
SYNOPSIS
nadspod [ –u host:unit ] [ –a ] [ –s start_addr ] [ –e end_addr ]
DESCRIPTION
nadspod dumps the contents of the DAT-Link's DSP32C memory to the standard output. If the –a
option is specified, then the output is in ASCII format with one 32-bit word output per line. Otherwise
t he output is binary data. In either case the DSP32C byte-ordering is used.
The binary output from nadspod can be piped into od(1) for formatted displays
OPTIONS
–a Use ASCII output.
Use the NetAudio server on host that is connected to the DAT-Link with unit-number unit.
Otherwise, use the value of the
then use unit 0 on the local host.
ENVIRONMENT
NetAudio server to use of the form host:nn , where host is the name of the host
AUDIO_DEVICE
where the server is running and nn is the unit number of the DAT-Link to use. If no
s et, unit 0 on the local host is used is used.
SEE ALSO
netaudiod(8), naloaddsp(1),
DAT-Link User's Manual.
N etAudio Reference
environment variable. If it is not set either
AUDIO_DEVICE
Last change: 1992/12/17
151
,
.
,
t
1