User Programs; Dlmkrdy - Townshend Computer Tools DAT-Link User Manual

146
NAME
dlmkrdy – force a DAT-Link to release its pause output.
SYNOPSIS
dlmkrdy [ –c ] [ –u unit ] [ –D device ]
DESCRIPTION
dlmkrdy connects to the specified DAT-Link unit and forces its pause output to be released. This
allows other DAT-Links connected to the selected one via an external sync cable to be used for play
b ack or recording independently. Without this, the other units will wait forever for any connected units
to start playback or recording.
T o indicate this mode, the left channel red VU LED and right channel yellow LED on the front panel
of the DAT-Link will be illuminated.
OPTIONS
–c Clear the forced ready state for the specified DAT-Link. Note that use of any other NetAudio
or DAT-Link program will also clear the state.
– u unit Specify the DAT-Link unit to use. Default is 0 or the value of the environment variable
if it is set.
DL_UNIT,
–D devic e
Specify the device file to open to access the DAT-Link. The default is /dev/datlinknn where
nn is the DAT-Link unit number.
ENVIRONMENT
Default DAT-Link unit number to use. If not set, unit 0 is used. The value of
DL_UNIT
D L_UNIT
FILES
/dev/datlinknn
SEE ALSO
dlmplay(1) dlmrec(1) netaudiod(8)
DAT-Link User's Manual.
NOTES
The NetAudio server, netaudiod(8),
must not be running to use dlmkrdy. This program is supported only by DAT-Link revisions 1.6 or
later.
D AT-Link Reference
can be overridden by the –u option.
DAT-Link devices, nn is the unit number of the device.
Last change: 1994/11/17

DLMKRDY(1)

-
1