Universal Raid Utility - NEC Express5800/A1080a User Manual

Software

Universal RAID Utility

Universal RAID Utility is an application to manage or monitor the following RAID controller.
● NE3104-001 Internal 6Gbps SAS RAID Controller
Refer to the "Universal RAID Utility Ver2.1 or later User's Guide" for Windows or "Universal RAID
Utility Ver2.3 User's Guide" for Linux included in NEC EXPRESSBUILDER. The manual explains
the Universal RAID Utility installation procedure and provides notes on the Universal RAID Utility
operation.
Setup using setup program of Universal RAID Utility
You can setup the Universal RAID Utility directly using the setup program of the Universal RAID
Utility. Refer to the "Universal RAID Utility Ver2.1 or later User's Guide" for Windows or
"Universal RAID Utility Ver2.3 User's Guide" for Linux included in NEC EXPRESSBUILDER for
installation operation.
● Windows
You can start the setup program of Universal RAID Utility from [Autorun Menu].
Click to [Setup Software] → [Universal RAID Utility] in [Autorun Menu].
You need to install the following software.
－ Microsoft .NET Framework 2.0 or later
－ The Runtime component of the Microsoft Visual C++ 2005 SP1
● Linux
You need to run the setup.sh in the install image of Universal RAID Utility.
There is the install image of Universal RAID Utility in the following directory of NEC
EXPRESSBUILDER.
/lnx/pp/uraidutl
Management of RAID System using NEC ESMPRO Manager
Using NEC ESMPRO Manager (Ver. 5.2 or later) allows you to view, monitor, and operate the
RAID System managed by the Universal RAID Utility. This feature is available on Windows
system only.
See the instruction of NEC ESMPRO Manager about system requirements and how to use.
Creating Logical Drive of RAID 6
Please use WebBIOS when you create the Logical Drive of RAID 6 with three Physical
Devices.Universal RAID Utility cannot create the Logical Drive of RAID 6 with three Physical
Devices
562