Table of Contents
Advertisement
Hardware
(16)-1
Select authentication method in "Authentication."
Selection Options
(16)-2
"User Name"
Up to 16 characters of one-byte alphanumeric characters and "_", "-" of ASCII character
code can be entered for user name.
(16)-3
"Password"
Up to 20 characters of one-byte alphanumeric characters and symbols can be entered
for password.
(17)
Set the sender address to "From Address"
one-byte alphanumeric characters and "_","-"," .","@" are available.
(18)
Set encryption method for Email contents.
(18)-1
Select encryption method from "Encryption Method."
Selection Options
Local Encryption
AES Encryption
(18)-2
"Password"
Enter password in 8 or more or 20 or less one-byte alphanumeric characters and
symbols when AES Encryption is selected in (18)-1.
(19)-1
"Mail Server (POP)IP"
This function is unavailable.
(19)-2
"User Name"
This function is unavailable.
(19)-3
"Password"
This function is unavailable.
(20)-1
Clicking "Submit" enables to set the information of (14) ~ (19) and move to the initial
screen of Alert Management.
(20)-2
Clicking "Cancel" enables to move to the initial screen of Alert Management.
IMPORTANT:
The alert mail might not be able to be used depending on the
settings of the network and the SMTP server.
None
PLAIN
LOGIN
CRAM-MD5
468
Advertisement
Table of Contents
Troubleshooting
