NEC Express5800/A1080a User Manual page 329

Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
current change to previous
value before saving it to
nonvolatile memory.
Select "Yes" to restore the
previous value. Select "No" to
return to "Save & Exit" Menu
screen.
- Select this item to restore all the
values to default value (factory
default). Confirmation screen is
displayed when selecting
"Restore Defaults".
Select "Yes" to restore default
value.
Select "No" to return to "Save
and Exit" Menu screen.
- Temporarily save SETUP
parameter of user to nonvolatile
memory. The setting saved by
this item is able to be loaded
using Restore User Defaults.
The user setting saved to
nonvolatile memory will be kept
unless it is cleared by f BIOS SG
settings clear operation.
- Select this item to load the
setting saved by user.
- Display all the bootable devices
which directly allow user to boot
device regardless Boot Option
Priorities list. If no change is
made, or if some changes
wihich do not require reboot are
made to BIOS setup option,
then system does not reboot
and does boot the selected
device. If some changes which
require reboot are made and
saved to BIOS setup option,
then sytem does reboot
regarding Boot Option Priorities
list and does not boot the
selected device.
329
Hardware
[ ]: Factory default