Table of Contents
Advertisement
Command List
The following is the list of the command used on the system diagnosis. Refer to "Command
Reference" for the details of using each command
Command
close
Collapse the display under the specified device on the tree.
desel
Unselect the test device from the test target.
exec
Start test.
fail
Display the test information of test ended with error.
help
Display the command list.
info
Display the detailed information of the test device.
list
Display the test device list.
log
Save the log of executed test.
open
Expand the display under the specified device on the tree.
option
Display the test ending condition.
pass
Display the test information ended normally.
reboot
Reboot the system.
round
Set the number of times of test.
select
Select the test device to be the test target.
shutdown
Shutdown the system.
stat
Display the test status of whole TeDoLi.
statv
Display the detailed status of each test.
term
End the currently-executed test forcibly.
time
Set the test duration.
ver
Display the version of the TeDoLi.
warn
Display the test information of Warning status.
Idle status
Executing status
Waiting
for
Termination
status
Command Supporting Function
Tab complement and history function is prepared as part of the command supporting function
of the system diagnostics.
■ Tab complements
Pressing the tab twice to enable this function. It lists all the available commands when no
command is entered. When a single character is already entered, commands sorted with the
entered character is displayed. If there is only one corresponding command, the sorted
command is displayed on the command line.
■ History function
( = Available = Unavailable).
Description
:
:
Status that the test is being executed.
:
Status that waiting for the completion of the test.
627
Operation and Maintenance
Status before starting the test. Or the
status after
the completion of test.
Idle
Exec Wait
Advertisement
Table of Contents
Troubleshooting
