Error During Post - NEC Express5800/A1080a User Manual

Error during POST

An error message is displayed on the screen of the display device when an error is detected
during POST.
Error Messages Shown on the Display
The following shows the error message list, the causes, and the troubleshooting.
Example of Display Format
ERROR: Type:2; Severity:80; Class:0; Subclass:5; Operation: 800B
List of Causes/Troubleshooting corresponding the Codes
Sever
Type Class
-ity
2 80
2 80
2 80
2 80
2 80
2 80
2 80
2 80
2 80
2 80
2 80
2 80
2 80
2 80
2 80
Sub- Oper-
class ation
0 1 1006
0 1 1004
0 1 1003
0 4 1008
0 4 1009
0 5 800D
0 5 800B
2 1 9
3 2 1000
3 2 8000
3 3 8005
3 3 8009
3 3 800B
3 3 800A
3 3 8008
Cause
Abnormal CPU temperature
CPU BIST error
Invalid CPU stepping
NVRAMdeletion ended
abnormally
Not detecting Memory
IOH Initialization ended
abnormally
Abnormal RTC battery
Detects insufficient resource
at PCI device check
BIOS ended abnormally
(DXE Core not detected)
BIOS ended abnormally (no
PPI for DXE loading)
S3 Resume ended
abnormally (PPI not
detected)
Recovery Failure (PPI
Undetected)
S3 Resume ended
abnormally
Recovery Failure
S3 Resume ended
175
Hardware
Troubleshooting
Replace the removed CPU.
Replace the removed CPU.
Replace the removed CPU.
Replace IOM.
Check if memory is mounted.
Replace the removed PMM.
Replace battery.
Check if PCI device is
mounted.
Update BIOS or replace the
removed CPU.
Update BIOS or replace the
removed CPU.
Update BIOS or replace the
removed CPU.
Update BIOS or replace the
removed CPU.
Update BIOS or replace the
removed CPU.
Update BIOS or replace the
removed CPU.
Update BIOS or replace the