Table of Contents
Advertisement
Hardware
DIMM Mounting Rule
A1080a-S/A1080a-D Model
A pair of DIMMs is defined as "PAIR" in this Guide, which is connected from the same channel
(Ch.x) number in two memory buffers connected to the same memory controller.
Example) DIMM #1 and DIMM #2 are regarded as PAIR #1, which are connected from
The exact same type of DIMMs (Column/Row/Bank/Rank configuration) must be mounted on
the same PAIR.
In the A1080a-S/A1080a-D model configuration, "PAIR" indicating pairs of DIMM is the basic
unit of DIMM control. DIMMs are added or reduced by using this PAIR unit.
Add in pairs starting from PAIR #1 in the order of lowest to highest number as a rule when
adding DIMMs.
Memory Configuration Diagram
PAIR #1
PAIR #3
PAIR #5
PAIR #7
Ch.1 of the memory buffer #1 and Ch.1 of the memory buffer #2 in the following
memory configuration diagram.
#1
DIMM
#5
DIMM #6
DIMM
DIMM #9
DIMM #13
DIMM #14
Ch.1
Ch.0
Ch.0
Memory
Buffer#1
Buffer#2
A
Ch.
Memory Controller#1
PAIR #2
#2
DIMM
PAIR #4
PAIR #6
#10
DIMM
PAIR #8
Ch.1
Memory
B
Ch.
Processor
102
#3
DIMM
DIMM
#7
#8
DIMM
DIMM
#11
DIMM
DIMM
DIMM #15
DIMM #16
Ch.1
Ch.0
Ch.1
Ch.0
Memory
Memory
Buffer#3
Buffer#4
C
Ch.
Memory Controller #2
#4
#12
Ch.D
Advertisement
Table of Contents
Troubleshooting
