Fan Removal /Installation - Pacific energy BRISTOL Installation And Operating Instructions Manual

INSTALLER
INFORMATION
1. Make sure that the gas and electrical supply is shut off. Locate and remove
the two 3/8" bolts securing the bottom of door as seen in Figure 41
2. Tilt the bottom of the door away from the appliance and lift the door off.
Media Removal
Removal ( gures 42 & 43)
1. Remove the loose embers from replace.
2. Remove the decorative log pieces from the rebox.
3. Lift and remove the two large ember blocks from the burner.
5055.633-B
Fan Removal / Installation
Figure 41
Figure 42 Figure 43
28
BRSL.BODYB
140515-44
BDFD.BODYB