First Fire - Pacific energy BRISTOL Installation And Operating Instructions Manual

OWNER'S
INFORMATION
Congratulations on your purchase of a Pacific Energy Gas Appliance.
Your fireplace has been professionally installed by:
Dealer name: _______________________________
Phone Number:_____________________________
If you discover any problems with your gas appliance contact your dealer immediately to have the
unit repaired.
Caution: Do not attempt to repair the fireplace because you may cause injury to yourself or others,
and risk causing damage to the unit.
Before operating your appliance carefully read this manual and pay close attention to all
Safety Warnings. The manual contains important information on the unit's safe operation and
maintenance.
When lit for the first time, the fireplace will emit a slight odour for a couple of hours. This is due to
the curing of paints, sealants and lubricants used in the manufacturing process. This condition is
temporary. Open doors and windows to ventilate area. Odour caused by the curing process may
cause discomfort to some individuals.
It is normal for fireplaces fabricated of steel to give off some expansion and/or contraction noises
during the start up or cool down cycle. Similar noises are found with your furnace heat exchanger
or cook stove oven.
5055.633-B

First Fire

NOTE: Fireplace may
take up to 30 seconds
to ignite each time the
"ON" button has been
selected
6
BRSL.BODYB
140515-44
BDFD.BODYB