Surround Installation Instructions - Pacific energy BRISTOL Installation And Operating Instructions Manual

INSTALLER
INFORMATION
Surround Installation
Figure 32: Door
The surround cover (Fig.32) attaches to the lintel once the decorative backing plate has been installed.
The surround easily ts into place by connecting all four of its hooks to the lintels four tabs (Fig.33).
Figure 34: Top of surround fitting inside
the baffle during installation
Installation
1. Install surround with screen mesh (Fig. 32) after Backing Plate installation is finished.*
2. Surround is secured by four built in hooks (Fig. 33) attaching to four tabs (Fig. 33) built
in to the lintel. Insert surround into lintel frame.
* Backing plate is not shown
5055.633-B

Surround Installation Instructions

Figure 33: Surround hand lintel tab
Figure 35: Surround in place (backing not shown)
24
BRSL.BODYB
140515-44
BDFD.BODYB