Fan Removal / Installation - Pacific energy BRISTOL Installation And Operating Instructions Manual

1. Make sure that the gas and electrical supply is shut off. Locate and remove the two 3/8" bolts securing the
bottom of door as seen in Figure 43.
2. Tilt the bottom of the door away from the appliance and lift the door off.
Media Removal
Removal (Figure 44 and Figure 45)
1. Remove the loose embers from replace.
2. Remove the decorative log pieces from the rebox.
3. Lift and remove the two large ember blocks from the burner.
Figure 44: Logs in place.
5055.633-B

Fan Removal / Installation

Figure 43: Door bolts location.
Figure 45: Left large ember block removed.
28
BRSL.BODYB
050216-44
BDFD.BODYB