Burner Installation/Removal - Pacific energy BRISTOL Installation And Operating Instructions Manual

Air De ector Installation / Removal
Installation
Position the air de ector in the replace as seen in
Figure 60 and secure with two screws using a screw-
driver.
Removal
Remove the two screws seen in Figure 60 using a
screwdriver, and remove the air de ector from
Burner Tray Installation / Removal
Installation
Place the burner tray in the replace and secure with
4 screws using a screwdriver, as seen in Figure 61.
Removal
Remove the 4 screws seen in Figure 61 using a
screwdriver, and remove the burner tray.
Burner Installation / Removal
Installation
Place burner in rebox so that the venturi is over top
of the ori ce. To secure burner insert screw using a
screwdriver as seen in Figure 62.
Removal
Remove screw seen in Figure 62 and lift burner out of
the unit.
BRSL.BODYB
140515-44
BDFD.BODYB
Figure 62:Burner
replace.
33
INSTALLER
INFORMATION
Figure 60: Air Deflector
Figure 61:Burner Tray
Figure 63:Burner Kit
5055.633-B