Fan Removal / Installation - Pacific energy BROADWAY Installation And Operating Instructions Manual

1. Make sure that the gas and electrical supply is shut off. Locate and remove the two 3/8" bolts securing the
bottom of door as seen in Figure 42.
2. Tilt the bottom of the door away from the appliance and lift the door off.
Figure 42: Door bolts location.
Media Removal
Removal (Figure 43 and Figure 44)
1. Remove the loose embers from replace.
2. Remove the decorative log pieces from the rebox.
3. Lift and remove the two large ember blocks from the burner.
Figure 43: Logs in place.
5055.66-B

Fan Removal / Installation

26
Figure 44: Left large ember block removed.
BDWY.BODYB
230216-44
BRNT.BODYB