Bdfd.bodyb - Pacific energy BRISTOL Installation And Operating Instructions Manual

OWNER'S
INFORMATION
Remote Flame Control
The Pro ame has six (6) ame levels. With the
system on, and the ame level at the maximum in
the appliance, pressing the down arrow key once will
reduce the ame height by one step until the ame is
turned off.
The Up Arrow Key will increase the ame height each
time it is pressed. If the Up Arrow Key is pressed
while the system is on but the ame is off, the ame
will come on in the high position. (Fig. 9) A single
"beep" will con rm reception of the command.
Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat. The thermo-
stat can be set to a desired temperature to control the comfort level
in a room.
To activate this function, press the Thermostat key (Fig. 1). The
LCD display on the transmitter will change to show that the room
thermostat is "ON" and the set temperature is now displayed (Fig.10).
To adjust the set point, press the up or down arrow keys until the
desired set point temperature is displayed on the LCD screen of the
transmitter.
Smart Thermostat (Transmitter Operation)
The Smart Thermostat function adjusts the ame height in accordance
to the difference between the set point and the room temperatures. As
the room temperature gets closer to the set point, the Smart Function
will modulate the ame down. If the room temperature is cool, the Smart
Function will modulate the ame up. To activate this function, press the
THERMOSTAT key (Fig. 1) until the word "SMART" appears to the
right of the temperature icon (Fig.11). To adjust the set point, press
the up or down arrow keys until the desired set point temperature is
displayed on the LCD screen of the remote transmitter (Fig. 12).
5055.633-B
10
Figure 9:
Figure 10
Figure 11: Smart Flam
Function
Figure 12
BRSL.BODYB
140515-44

BDFD.BODYB