Pacific energy BRISTOL Installation And Operating Instructions Manual page 29

Figure 44
Figure45
3. Remove two screws from the burner plate (Fig. 46) and remove.
4. Remove the side and rear rebox panels (Fig. 47 & 48)
Note: The two side rebox panels hold the rear rebox panel in place.
Support the rear rebox panel as the side panels are being removed.
Figure 48
BRSL.BODYB
140515-44
BDFD.BODYB
Removing the Burner and Burner tray.
1. Remove the screw holding the burner to
the burner tray (Figure 44).
2. Remove two screws from the upper baffle
and remove (Fig. 45)
Figure 46
29
Figure 49
5055.633-B
INSTALLER
INFORMATION