Bdfd.bodyb - Pacific energy BRISTOL Installation And Operating Instructions Manual

Temperature indication Display
With the system in the "OFF" position, press the Thermostat Key
and the Mode Key at the same time. Look at the LCD screen on the
transmitter to verify that a C or F is visible to the right of the Room
Temperature display. (Fig. 6 & 7)
Turn on the Fireplace
With the system OFF, press the ON/OFF Key on the remote transmitter.
The remote transmitter display will show some other active Icons on
the screen. At the same time the Receiver will activate the Heater. A
single "beep" from the Receiver (module) will con rm reception of the
command.
Turn off the Fireplace
With the system ON, press the ON/OFF Key on the Remote transmitter.
The Remote transmitter LCD display will only show the room tempera-
ture (Fig. 6 or 7).
At the same time the Receiver (module) will turn off the Heater. A single
"beep" from the Receiver con rms reception of the command.
Manual Bypass of the Remote System
If the batteries of the receiver or remote transmitter are low or depleted,
the Heater can be turned off manually using ON/OFF switch located on
battery box at the rear of the Broadway/Brentwood. This will bypass the
remote transmitter.
Key Lock
This function will lock the keys to avoid unsupervised operation. To
activate this function, press the MODE and UP keys at the same time.
The lock icon will appear (Fig. 8). To de-activate this function, press the
MODE and UP keys at the same time.
BRSL.BODYB
140515-44

BDFD.BODYB

9
OWNER'S
INFORMATION
Figure 6: Display in Fahrenheit
Figure 7: Display in Celsius
Figure 8
5055.633-B