Pacific energy BRISTOL Installation And Operating Instructions Manual page 31

8. The fan is located inside the opening and toward the rear of the rebox. A 3/8" nut holds the fan
assembly onto a threaded post. Remove the nut and gently extract the fan assembly from the re
box (Fig. 54) Be careful not to accidentally catch any other wires while the fan is being extracted.
Figure 54
9. Disconnect the two power wires (Fig. 55) before fully extracting the fan from the
opening.
10. Installation is reverse of removal. Return the media to its proper place according to
by referring to the appropriate section of this manual.
BRSL.BODYB
140515-44
BDFD.BODYB
31
INSTALLER
INFORMATION
Figure 55
5055.633-B