Pacific energy BRISTOL Installation And Operating Instructions Manual page 11

Comfort Fan Speed Control
If the Heater is equipped with a hot air circulating fan, the speed of the fan can be con-
trolled by the Pro ame2 System. The fan speed can be adjusted through six (6) speeds.
To activate this function use the Mode Key (Fig. 1) to index to the fan control icon (Fig. 13).
Use the Up/Down Arrow Keys (Fig. 1) to turn on, off or adjust the fan speed (Fig. 13). A
single "beep" will con rm reception of the command.
Continuous Pilot/Intermittent Pilot (CPI/IPI) selection
With the system in the "OFF" position, press the Mode Key (Fig. 1) to index to the CPI
mode icon (Fig. 14). Pressing the Up Arrow Key will activate the Continuous Pilot Ignition
mode (CPI). Pressing the Down Arrow Key will return to IPI. A single "beep" will con rm
the reception of the command.
BRSL.BODYB
140515-44
BDFD.BODYB
Figure 13: Fan Control
Figure 14: CPI/IPI Selection
11
OWNER'S
INFORMATION
5055.633-B