Chapter 4
Preparation and Precautions for
Maintenance
This chapter describes preparations that must be completed prior to maintenance and
the precautions for various work and maintenance.
Confirming the System Configuration
■
Troubleshooting
■
Maintenance Precautions
■
4.1
Confirming the System Configuration
This section explains how to check the hardware and software configurations.
After completing any maintenance, it is necessary to confirm that the the system
configuration is the same as that before starting the work. If an error occurs in the
system, record the system configuration and the FRU state before starting maintenance.
After maintenance, confirm that the system configuration is the same as that before
maintenance.
4.1.1
Confirming the hardware configuration
Execute the showhardconf command to confirm the configuration and status of the
FRU mounted in the chassis. Before performing any maintenance work, check and
record the hardware configuration of the chassis.
1.
2.
XSCF> showhardconf
The following information is displayed:
Current configuration and status
■
Log in to the XSCF shell.
Execute the showhardconf command to confirm the hardware configuration
information.
37