Fujitsu M10-4 Service Manual page 171

Table 7-25 Active/cold removal work procedure (building block configuration only)
Item
Work procedure
1 Opening the rack door
2 Checking the operating condition of the
system and the I/O device usage status
3 Releasing the assignment of a PCIe card
4 Releasing the chassis requiring maintenance
from the partition
5 Releasing the chassis requiring maintenance
from the system
6 Enabling access to the FRU requiring
maintenance
7 Removing an FRU for removal
8 Restoring the chassis requiring maintenance
9 Incorporating the chassis requiring
maintenance into the system
10 Diagnosing the chassis requiring
maintenance
11 Incorporating the chassis requiring
maintenance into a partition
12 Confirming that there is no problem with
the chassis after the removal
13 Restoring the logical domain
14 Closing the rack door
*1 Normally, the testsb command is executed during replacefru command processing. However, if that is canceled, diagnose the system
board before incorporating the chassis requiring maintenance into the physical partition.
Reference
"5.3 Checking the Operating Condition and Resource
Usage Status"
"5.4.1 Releasing the assignment of I/O
"5.4.3 Releasing a chassis requiring maintenance from the
physical partition"
"5.8.1 Releasing of the SPARC M10-4S chassis (possible
only in a system with a building block
"5.9 Accessing an FRU"
See the removal procedures for each FRU (Chapters 8 to 10).
"Chapter 8 Maintaining the PCI Express
"Chapter 9 Maintaining the CPU Memory
"Chapter 10 Maintaining the Internal
"6.1 Restoring the Chassis"
"6.2.1 Incorporation of the SPARC M10-4S chassis (possible
only in a system with a building block
"6.3.1 Diagnosing the system
"6.3.2 Diagnosing the crossbar unit and crossbar
"6.5.1 Incorporating a chassis into a physical
"4.2.2 Identifying a failure" -
"6.5.3 Restoring the logical domain to the pre-maintenance
state"
devices"
configuration)"
Cards"
Unit/Memory"
Disks"
configuration)"
board" (*1)
cables"
partition"
"Checking the FRU status"
Chapter 7 Maintenance Flow 157