Figure 5-11 Removing the power cord
5.9.5
Removing the front cover
To perform maintenance on the following FRUs from the front of the chassis, remove
the front cover before starting the work:
- Fan unit
- Power supply unit
- PSU backplane unit
- Operation panel
1.
Release the right and left slide locks of the front cover and pull it towards the
front.
Figure 5-12 Releasing the slide locks of the front cover
2.
Lift the front cover upwards to remove it.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ November 2014
86