Fujitsu M10-4 Service Manual page 259

Note - Of the two PCIe cables on the right side, also install the one (short) cable on the rear of
the CPU memory unit lower.
5.
If a filler unit for the CPU memory unit upper has been installed, hold the
packaging material (A and B in the figure) of the PCIe cable connector part
over the top of the left- and right-side guides (C and D in the figure).
Figure 9-65 Packaging material of the PCIe cable connector part
C
A
6.
Align the four clips on each of the left- and right-side guides to the grooves in
the frame of the CPU memory unit lower to install them. Slide in the guides to
lock them.
Note - When replacing the CPU memory unit lower, use the left- and right-side guides
supplied with the new CPU memory unit lower.
Note - Be careful not to damage any PCIe cable when installing the left- and right-side
guides. Also be careful not to pinch the packaging material of the PCIe cable connector part
with any clip on the left- and right-side guides.
Chapter 9 Maintaining the CPU Memory Unit/Memory
B
D
245