Fujitsu M10-4 Service Manual page 203

Maintenance workflow of memory
Figure 9-4 Maintenance workflow of memory
4. Replacement
4. Remove memory
5. Install memory
6. Install removed CPU
memory unit upper or
filler unit
7. Install CPU memory unit
in chassis
(Go to "7.2 FRU Replacement
Table 9-4 Memory replacement workflow and procedures
Item Maintenance work procedure
1 Accessing the CPU memory unit
2 Removing a CPU memory unit from the
chassis
3 Removing the CPU memory unit upper
when the target memory is in the CPU
memory unit lower.
4 Removing memory
5 Installing memory
6 Installing the removed CPU memory unit
upper
7 Installing the CPU memory unit in the
chassis
(Enable removal of chassis requiring maintenance)
3. Removing CPU memory unit upper or
filler unit when target memory is in
CPU memory unit lower
Workflow")
1. Access CPU memory
unit
2. Remove CPU memory
unit from chassis
4. Installation
4. Install memory
5. Install removed CPU
memory unit upper or
filler unit
6. Install CPU memory
unit in chassis
(Go to "7.3 FRU Installation
Workflow")
Reference
9.3.1 Accessing a CPU memory unit
9.3.2 Removing a CPU memory unit from the chassis
9.3.3 Removing the CPU memory unit upper
9.6 Removing Memory
9.7 Installing Memory
9.8.1 Installing the CPU memory unit upper
9.8.2 Installing the CPU memory unit in the chassis
Chapter 9 Maintaining the CPU Memory Unit/Memory
4. Removal
4. Install memory
5. Install removed CPU
memory unit upper or
filler unit
6. Install CPU memory
unit in chassis
(Go to "7.4 FRU Removal
Workflow")
189