1
C H A P T E R
Safety Precautions for Maintenance
This chapter provides safety precautions required for maintenance.
Section 1.1, "ESD Precautions" on page 1-1
■
Section 1.2, "Server Precautions" on page 1-3
■
1.1
ESD Precautions
To ensure that you and bystanders are not exposed to harm and to prevent damage
to the system, observe the following safety precautions.
ESD Precautions
TABLE 1-1
Item
ESD connector/wrist strap
Conductive mat
ESD safe packaging box
Precaution
Connect the ESD connector to your server and wear the antistatic wrist strap
when handling printed circuit boards. See
connection destination.
An approved conductive mat provides protection from static damage when
used with a wrist strap. The mat also cushions and protects small parts that
are attached to printed circuit boards.
Place a printed board or component in the ESD safe packaging box after you
remove it.
, for the wrist strap
FIGURE 1-1
1-1