Fujitsu M10-4 Service Manual page 78

Hide thumbs Also See for Fujitsu M10-4:
Table of Contents

Advertisement

                                +   Type:04;   Size:8   GB;
------------------------ Omitted -----------------------
2.
Execute the format command to confirm the physical disk slot.
(1) to (5) in the following example specify the following:
(1): Logical path name of the disk
(2): The disk is mounted in the HDD00 slot of BB#01.
(3): The disk is mounted in the HDD01 slot of BB#01.
(4): The disk is mounted in the HDD00 slot of BB#00.
(5): The disk is mounted in the HDD01 slot of BB#00.
#   format
Searching   for   disks...done
 
AVAILABLE   DISK   SELECTIONS:
        0.   c2t50000394281B5312d0   <TOSHIBA-MBF2600RC-3706   cyl   64986   alt   2   hd   27   sec
  668>   <--   (1)
              /pci@8800/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000394281b5312,0
              /dev/chassis/FUJITSU-BBEXP.500000e0e06d31bf/03N0_HDD00/disk   <--   (2)
                                                                                                      *   The   last   four   digits   of  
the   BB#1_CMUL   serial   number
        1.   c2t50000394281B59D6d0   <TOSHIBA-MBF2600RC-3706   cyl   64986   alt   2   hd   27   sec
  668>   <--   (1)
              /pci@8800/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000394281b59d6,0
              /dev/chassis/FUJITSU-BBEXP.500000e0e06d31bf/03N0_HDD01/disk   <--   (3)
        2.   c0t500003942823C8C6d0   <TOSHIBA-MBF2600RC-3706   cyl   64986   alt   2   hd   27   sec
  668>   <--   (1)
              /pci@8000/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w500003942823c8c6,0
              /dev/chassis/FUJITSU-BBEXP.500000e0e06d237f/01Y1_HDD00/disk   <--   (4)
                                                                                                      *   The   last   four   digits   of  
the   BB#0_CMUL   serial   number
        3.   c0t50000394281B517Ad0   <TOSHIBA-MBF2600RC-3706   cyl   64986   alt   2   hd   27   sec
  668>   <--   (1)
              /pci@8000/pci@4/pci@0/pci@0/scsi@0/iport@f/disk@w50000394281b517a,0
              /dev/chassis/FUJITSU-BBEXP.500000e0e06d237f/01Y1_HDD01/disk   <--   (5)
Specify   disk   (enter   its   number):
Using the diskinfo command (Oracle Solaris 11)
1.
Execute the showhardconf command to confirm the CMUL serial number of
the chassis that indicates the mounting position information.
XSCF>   showhardconf
SPARC   M10-4S;
        +   Serial:2081238017;   Operator_Panel_Switch:Service;
        +   System_Power:Off;   System_Phase:Cabinet   Power   Off;
        Partition#0   PPAR_Status:Powered   Off;
        Partition#1   PPAR_Status:Powered   Off;
        BB#00   Status:Normal;   Role:Master;   Ver:2044h;   Serial:2081238017;
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ November 2014
64

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fujitsu m10-4s

Table of Contents