Fujitsu M10-4 Service Manual page 57

+ FRU-Part-Number:CA07361-D202 A0 ;
+ Power_Supply_System: ;
+ Memory_Size:320 GB;
------------------------ Omitted ------------------------
PCI#0 Status:Normal; Name_Property:pci;
+ Vendor-ID:108e; Device-ID:9020;
+ Subsystem_Vendor-ID:0000; Subsystem-ID:0000;
+ Model:;
+ Connection:7001;
* PCIBOX#7001; Status:Faulted; Ver:1110h; Serial:2121237001;
+ FRU-Part-Number:;
IOB Status:Normal; Serial:PP123403JE ;
+ FRU-Part-Number:CA20365-B66X 008AG ;
LINKBOARD Status:Normal; Serial:PP1234026P ;
+ FRU-Part-Number:CA20365-B60X 001AA ;
PCI#1 Name_Property:ethernet;
+ Vendor-ID:1077; Device-ID:8000;
+ Subsystem_Vendor-ID:1077; Subsystem-ID:017e;
+ Model:;
------------------------ Omitted -----------------------
- showstatus command
Execute the showstatus command to check the FRU status.
1.
Log in to the XSCF shell.
2.
Execute the showstatus command to check the status.
A faulty FRU is indicated by an asterisk (*) at the beginning of the line.
XSCF> showstatus
MBU Status:Normal;
* MEM#0A Status:Faulted;
The FRU status is displayed after the "Status:" string.
Table 4-3
Table 4-3 FRU status
Display
Normal
Faulted
Degraded
Deconfigured
Maintenance
describes the FRU status.
Description
The unit is in the normal state.
The unit is faulty and is not operating.
A part of the unit has failed or degraded, but the unit is running.
Due to the failure or degradation of another unit, the target unit and
components of its underlying layer has been degraded, though there
is no problem in them.
Maintenance is being performed. The replacefru, addfru, or initbb
command is being executed.
Chapter 4 Preparation and Precautions for Maintenance 43