Fujitsu M10-4 Service Manual page 133

Table 7-6 Active/hot replacement work procedure (for a PCI Express card)
Item
Work procedure
1 Opening the rack door
2 Checking the operating condition of the
system and the I/O device usage status
3 Releasing the assignment of a PCIe card
4 Enabling the removal of a faulty PCIe card
5 Lowering the cable support
6 Replacing a faulty PCIe card
7 Fixing the cable support
8 Incorporating the replacement PCIe card
9 Confirming that there is no problem with
the replacement FRU
10 Restoring the logical domain
11 Closing the rack door
Reference
"5.3 Checking the Operating Condition and Resource
Usage Status"
"5.4.1 Releasing the assignment of I/O
"5.4.2 Enabling the removal of an I/O
"5.9.2 Lowering the cable
"Chapter 8 Maintaining the PCI Express
"6.1.2 Fixing the cable support"
"6.5.2 Incorporating an I/O
"4.2.2 Identifying a failure" -
"Work to restore an I/O device in an I/O
restore the SR-IOV function", and
device" in "6.5.3 Restoring the logical domain to the
pre-maintenance state"
devices"
device"
support"
Cards"
device"
"Checking the FRU status"
domain", "Work to
"Work to restore a virtual
Chapter 7 Maintenance Flow 119