1.2
Warning Labels
Observe the warning labels (A in the figure) affixed on the SPARC M10-4/M10-4S
during the maintenance work.
Caution - Never peel off the labels.
Figure 1-1 Location of warning labels
1.3
Labels/Tags
This section describes the labels and tags attached to the SPARC M10-4/M10-4S.
For warning labels, see
Note - The contents of the labels and tags may differ from those that are actually affixed.
The system name plate label (A in
■
number, manufacture date, rated voltage/current, number of phases, frequency,
and weight for maintenance and management.
The standard label (B in
■
■
■
■
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ・ November 2014
2
A
"1.2 Warning
Figure
Safety: NRTL/C
Radio wave: VCCI-A, FCC-A, DOC-A, and KCC
Safety and radio wave: CE, BSMI, RCM, and EAC
A
Labels."
Figure
1-2) describes the model number, serial
1-2) describes the following certification standards.
A