Fujitsu M10-4 Service Manual page 187

1.
If the crossbar cables are fixed to the cable support with the hook-and-loop
fastener, remove the hook-and-loop fastener.
2.
Remove the cables connected to the PCIe card cassette requiring maintenance.
Note - Record the positions of the cables before removing them to ensure that they are
reinstalled correctly.
3.
Lower the lever (B in the figure) of the PCIe card cassette while pushing the
latch (A in the figure).
Figure 8-4 Lever of PCIe card cassette
4.
Hold the lever and carefully pull the PCIe card cassette out of the PCI slot to
remove it.
Note - Place the removed PCIe card cassette on a grounded antistatic ESD mat.
A
Chapter 8 Maintaining the PCI Express Cards
B
173