Multi-Line Appearance; Mute - Xblue Networks X-50 Installation Manual

Multi Line Appearance
Description:
At default, all of the X2020 telephones are programmed with the first four PSTN lines (701, 702,703 and 704). All
telephone lines can also be programmed on the Sidecar.
The button, once programmed, uses the LED to indicate the current state of the telephone line. For example,
when the line is busy, the light will be lit solid.
TABLE 4.9 Telephone Line status
LED Description
Dark Idle
Fast Flash Ringing
Slow Flash Line is on hold
Wink Flash Call is recalling
Lit Solid Line is Busy
Operation:
When making an outside call, the user may press one of the programmed telephone line button and then dial the
desired telephone number or just dial the telephone number and let the X-50 system automatically route the call.
Notes:

Mute

Description:
Each X2020 has a mute button that is used to temporarily disable the telephone's microphone.
Operation:
Press the Mute button to disable the telephone's microphone, which will light Red. Press the Mute button again to
disable Mute and continue the conversation. When Mute is disabled, the LED will not be lit.
Notes:
1. The Mute button may not mute a headset
Telephone Feature Description Table
XBLUE Networks
67