Xblue Networks X-50 Installation Manual page 149

Isolation Clients - Prevents wireless clients from seeing one another even though they are on the same
•
network. Select the Checkbox to enable "clients isolation", thus isolating the clients from each other.
Disable WMM Advertise - Wi-Fi Multimedia is used as Quality of Service, controlling the throughput of
•
audio, vidio and voice applications. At default, this is disabled.
Enable Wireless Multicast Forwarding (WMF) - is a delivery protocol for information to a group of
•
destinations. Although most applications use unicast (broadcasting to a single location), WMF is typically
used in oneway streaming media. At default, this is disabled.
Maximum Clients - Enter the number of clients that can access the selected wireless access point. a
•
Maximum of 16 clients can be authenticated at one time.
BSSID - Basic Service Set IDentifier is set to the Media Access Control (MAC) address of the X-50
•
gateway. This is a fixed parameter that cannot be modified.
XBLUE Networks
Wireless Programming
149