Flexible Numbering Plan; Hot Dial Keypad; Last Number Redial; Least Cost Routing - Xblue Networks X-50 Installation Manual

Feature Description

Flexible Numbering Plan

The X-50 is preprogrammed with a default numbering plan which may be changed to suit customers' needs.
When changing the numbering plan it is important to remember that the numbers entered cannot conflict with
the numbers entered in the Emergency Call Table.
TABLE 3.3 Default Numbering Plan
Description
Start extension number
End extension number
FXS Phone Extension
Operator speed-dial number
AA/Voicemail Service Number
Start Virtual Extension Number
Start PSTN Line number
Start IP Trunk Line Number
Start Trunk Group Number
All Paging number
All Paging Range
Paging Group Start Number
UCD Group Start Number
System Speed Dial
Start Call Park Number
X-50 X-50
to
Each X-50 VoIP Telephone System can be one of ten systems that creates a voice network. Once connected,
extensions will be able to dial directly to extensions on the network. For example, if an extension (111) in Boston
wanted to call an extension (211) in San Francisco they would dial 211. In the call routing table 211 will be
directed to the San Francisco Gateway and the call will be connected. Similarly, telephone line calls can be routed
to remote gateways for cost effective call processing.

Hot Dial Keypad

The X2020 telephone endpoints support hot dial keypad dialing, which allows a user to dial a telephone number
without lifting the handset or pressing the speaker button.

Last Number Redial

Last Number Redial also known as Redial is used to press one button for quick access to the last thirty numbers
dialed from that extension.

Least Cost Routing

See Call Routing
38
Default Numbers
101
125
125
0 Day/Night Alternate Day/Night
450
830
701
711
80
400
LAN/WAN/Both
401 (1) 401, (2) 402, (3) 403
430 (1) 430, (2) 431, (3) 432, (4) 433
600 600 through 699
731
XBLUE Networks
Configure