Advanced Setup Wan; Advanced Wan - Xblue Networks X-50 Installation Manual

Advanced Programming

Advanced Setup WAN

Device Info
•
Advanced
•
- WAN
•
- LAN
•
- NAT
•
- Parental Control
•
- Quality of Service
•
- Routing
•
- Dynamic DNS
•

Advanced WAN

Wide Area Network
At default, the WAN Port is set to Automatic Configuration - DHCP. Dynamic Host Control Protocol (DHCP) allows
the WAN Port of the X-50 to automatically receive an IP and Subnet Mask Address as well as locate and join the
network's default gateway or router. However, this may have been changed during the Setup Wizard. At default,
the WAN port can be set to Automatic Configuration - DHCP, but it could be set to Static IP or PPPoE.
110
XBLUE Networks