Installation Planning; Basics - Xblue Networks X-50 Installation Manual

5 Installation

Installation Planning

This chapter will show how to prepare and install the X-50 system and basic networking setup and
protocol.

Basics

1. Never perform any wiring in a wet location, while standing in water or during a lightning storm.
2. The X-50 should be installed in a well lit location with proper ventilation, having an optimum
temperature range from 40
3. The X-50 should not be installed where it will be exposed to direct sunlight or heat.
4. Do not install the X-50 close to or in a strong magnetic field, such as those generated by heavy
motors, televisions, copy machines or some kitchen appliances. Ideally, the X-50 should be
installed in an electrically noise-free environment to avoid interference.
5. Be careful when connecting any type of antenna or power through a cable that will be connected
directly or indirectly to the X-50.
Note:
The manufacturer Warranty does not cover damage caused by abuse, electrical or telephone line
power surges or lightning damage.
° °
to 95 F and a relative humidity range of 20 to 80 percent.
XBLUE Networks
75