Xblue Networks X-50 Installation Manual page 117

Virtual Servers Setup
The Virtual Server parameter directs incoming TCP, UDP or both TCP/UDP, traffic from the WAN side of the
connection, to a specific IP address on the LAN side. This is one way of directing incoming IP address data directly to
a specific LAN device. This parameter is useful for remote access for Peer to Peer communication and games. The
entered server's IP address is normally the computer or device on the LAN network that is running a specific
application or game. When the WAN IP Address is presented to the X-50 system, the informaiton is compared to this
table and when a match is found, it will be redirected to entered internal IP address
Select Virtual Server Setup, and then select "Add" to add servers or "Remove" to remove servers from the
current list.
A maximum of 32 entries can be configured.
XBLUE Networks
Advanced Programming
117