Transfer; Volume Control; Web Management - Xblue Networks X-50 Installation Manual

Transfer

Description:
Calls can be transferred from an extension to another destination, such as another extension, voice mail, or an
outside number. In addition, transfers can be blind, without announcing the call, supervised, listening for call
supervision, or screened where the transferring extension can announce the call.
Operation:
While on a telephone line call press the transfer button
•
Press the preprogrammed DSS button or dial the desired destination
•
Hang up to release the call, or remain on the line to announce the call
•
Notes:
1. If the receiving extension is forwarded, the transferred call will follow the forwarding
2. If the receiving extension is not forwarded, and goes unanswered, it will recall at the extension that
transferred the call

Volume Control

Description:
The X2020 system is equipped to adjust the volume levels of the following settings:
Ringing (extension and telephone line)
•
Handset
•
speaker
•
Headset
•
Operation:
Press the volume up to increase or down to decrease the volume of the currently used feature. For example,
while the telephone is ringing use the volume button to increase or decrease the ringing volume.
Notes:

Web Management

Description:
The X2020 can be programmed using the LCD menu or using a standard Internet Web Browser, such as Windows
Internet Explorer.
Operation:
Enter the IP Address in the browser address bar to access the Web interface page for programming.
Notes:
Telephone Feature Description Table
XBLUE Networks
73