Feature (Flexible) Button Programming - Xblue Networks X-50 Installation Manual

Telephone Feature Description Table

Feature (Flexible) Button Programming

Description:
The four buttons on the X2020 and any of the buttons on the Sidecar (DSS Console) can be reprogrammed to
accommodate a telephone PSTN or SIP Trunk Line, a feature or another extension. At default, the four buttons on
the telephone are set to the first four PSTN telephone lines (701, 702, 703, and 704) and all of the buttons on the
Sidecar are set to extensions 101~124.
Operation:
These features can be programmed using these codes or using a standard Internet Web Browser.
Dial *70 + BN + FT
•
BN = the button to be programmed; 01 - 04 on the telephone and 05 through 28 on the DSS Console,
•
going vertically down the left side, and then the right.
FT = the numeric value for the next 6 feature types:
•
00=Blank button
•
01=Extension; can be a physical LAN telephone
•
02=Trunk; can be either a PSTN or SIP Trunk or Trunk Group
•
03=Call Park; enter the call park dial code
•
04=Feature Key; enter the feature code such as *91 Agent log on
•
05=Others; such as a WAN extension, a speed dial number or a specific outside telephone number
•
06=Do Not Disturb; No need to enter *4 (Administrator can disable this feature)
•
07=Live Record
•
08=Virtual Mailbox (Virtual (Phantom) Extension - Group Mailbox)
•
Notes:
1. Most features can be programmed on a button
2. Some features require one button to enable and another to disable the feature
Examples:
Enter the following code to create a page button on button 4 - on the telephone:
TABLE 4.1 Dialing Codes
BN Program
*70
Enter the following code to create a Call Park button on button 1 - on the telephone:
TABLE 4.2 Dialing Codes
BN Program
*70
64
BN Number
04
BN Number Call Park
01 03
XBLUE Networks
Others Page Code
05 400
Park Location Code
731