Where To Begin - Xblue Networks X-50 Installation Manual

Installation

Where to begin

The X-50 can be mounted in one of three different ways, virticall, horizontally, or wall mounted. See "Wall
Mount Template" for wall mounting in structions
For best results;
If using PSTN telephone lines the X-50 should be installed near where they enter the building,
•
which is called the "RJ21X".
The X-50 should be installed in a server room or anywhere that is a computer might be placed.
•
It should be placed on a clean hard service or mounted on a wall.
The X-50 should be connected to all devices using Category 5, Category 5E or Category 6
•
cables.
The X-50 should be in a location that is easily accessible by anyone who may need to perform
•
maintenance on the unit.
The "TEL" port (analog telephone port) on the X-50 may be connected directly to a standard
•
corded, cordless telephone or FAX machine.
The X-50 should be placed on a line condition Uninterrupted Power Supply (UPS) system which
•
will provide line conditioning and battery back up during a power outage. To minimize the num-
ber of UPS systems needed, power all telephone endpoints using Power of the Ethernet (PoE).
76
Vertically
XBLUE Networks
Horizontally