Xblue Networks X-50 Installation Manual page 97

Programming Wizard
Call Routing Table
Once programmed, the Call Routing Table will automatically route calls through the proper telephone line or group of
lines (line group). Each entry may contain up to ten digits and has a "From" (start evaluation) and a "To" (end
evaluation) digit or set of digits. In addition, dialed numbers can be automatically modified to ensure that they are
sent through the most cost effective route. For example, if the main number of another system on the voice network
is dialed, that number can be deleted, and a new number can be inserted. The Call Routing Tables are also used to
direct three or four digit dialing between X-50 VoIP Telephone Systems.
XBLUE Networks
97