Wireless Programming - Xblue Networks X-50 Installation Manual

8 Wireless Programming

Wireless Programming
Integrated in the X-50 is an 802.11a, 802.11b, 802.11g and 802.11n wireless gateway. This gateway
can be used by standard computing devices as well as 802.11 communications devices.
At default the wireless interface is enabled, but unsecured. It is very important that security is enabled
prior to going on line and although nothing is 100% safe against malicious network attacks, enabling
security will minimize the effectiveness of any attacks. In addition, wireless security will stop
unintended client devices from joining the network.
Device Info
•
Advanced Setup
•
Wireless
•
- Basic
•
- Security
•
- MAC Filter
•
- Wireless Bridge
•
- Advanced
•
- Station Info
•
Voice
•
Management
•
Diagnostics
•
Logout
•
During the Setup Wizard, some of the default wireless settings may have been changed. Therefore, this
manual will show what the defaults are without any changes from the Setup Wizard.
XBLUE Networks
145