Xblue Networks X-50 Installation Manual page 96

Programming Wizard
• Support E.164 - This protocol was defined by ITU-T, to standardize international
telecommunications numbering plan, used over the Public Switched Telephone Network (PSTN).
For proper dialing formats, some SIP IP Trunk Providers may require this to be enabled. At
default, it is disabled.
Direct Inward Dial (DID)
•
DID Number - Enter the DID numbers that will be received from the SIP Trunks.
• Destination - Enter the destination of the receiving DID number, valid entries are a physical,
virtual extension or a UCD group.
•
Outgoing Caller ID - Enter the telephone number that the SIP Trunk will send when the entered
DID extension makes an outoing call.
• Display Name - Enter the name that the SIP Trunk will send when the entered DID extension
makes an outgoing call.
96
XBLUE Networks